This model is a controlled air incinerator, providing optimal combustion conditions for different waste types. Featuring our SMARTPANEL technology, this system can 'learn' about your waste stream, then via remote diagnosis we can fine tune its performance to suit your needs. Available with a wide range of pre-combustion modules to improve throughput and comprehensive options for the handling of exhaust gases. Professionally installed and maintained if you sign up for our Inciner8 Network services.
Average emissions / EU standards On basic incinerators (with secondary chamber)
(1/2 hr av)
|Total dust||30 mg/m3||12 mg/m3|
|Sulphur dioxide||200 mg/m3||2,4 mg/m3|
|Nitrogen dioxide*||400 mg/m3||60 mg/m3|
|Carbon monoxide||100 mg/m3||78,3 mg/m3|
All our incinerators are hand-built in the UK by time-served welders and fabricators. Our award winning design team are always on hand to offer their advice and technical know-how to ensure we get your project off the ground without delay. We can also assist you in the prerparation for your planning or permit application where required.
|Operational Specs||Physical Specs|
|Combustion Chamber Volume (m3)||8.72m3||External Length (mm)||6490mm|
up to 500kg per hour
|External Width (mm)||2000mm|
|Average Fuel Consumption||65 kg per hour||External Height (mm)||6260mm|
|Operational Temperature||850 - 1300°C||Shipping Weight||21500kg|
|Gas Retention in Secondary Chamber||2 secs|
|Average ash residue (%)||3%|