Inciner8 waste incinerators and secondary burners

The secondary burner kits fit onto the incinerator stack and provide a third level of re-burn on the exiting smoke from the primary chamber. The secondary burner is approximately 75% lower output than the primary burner as it only needs to heat and cross a smaller space therefore reducing fuel usage.

	A200	A500
Transition stack
Metal Thickness	14 ga aluminized	14 ga aluminized
Refractory Thickness	2" min.	1.5"
Diameter	12" to 18"	14" to 18"
Height	19.5"	3"
Volume	0.45 cu ft	0.16 cu ft
Secondary Chamber
Metal thickness	14 ga aluminized	14 ga aluminized
Diameter	18"	18"
Volume	1.38 cu ft	1.38 cu ft
General
Stack diameter	14"	14"
Height to top of stack cap	12'6"	16'5"
Height to top of secondary	6'0"	6'9"
Burner for all models: Model Max 4 (oil) or Azur 40 (gas)

Some countries or states require secondary burners for all agricultural incinerators.

It is proven that due to the fact that our incinerators have a natural secondary burn, it is only ever necessary through law rather than choice. We now have this option available for our A200, A400, and A500 incinerator models.

Retrofit kits are also available.