Ease
of Use
Auto ignition. No pilots to light. Set the timer and walk
away.
Single burner reduces maintenance cost.
Built-in skid facilitates placement
Fuel
Efficiency
Rapid incineration means low fuel consumption.
Higher burn rate than smaller models.
Thick refractory lining in main chamber retains heat,
increasing efficiency.
Quality
Built to Last
Heat resistant aluminized steel.
Stainless steel stack.
The Benefits of Incineration . . .
SANITARY - Waste can be
destroyed as fast as it accumulates.
Nothing is left to spread disease or to attract rodents and flies.
CONVENIENT -
Fill the
chamber and turn on the burner.
No watching required since timer automatically shuts down burner.
Alternative methods frequently require more time to manage and maintain.
THOROUGH -
Leaves
only sterile white ash and brittle bone fragments.
Reduces 200kg of animal carcasses to approximately 10kg of
sterile residue.
Features Overview
-
Designed for economical performance.
-
200kg capacity.
-
Low profile for easy loading and ash removal.
-
Refractory lined to retain heat for efficient
operation.
-
Available with LP, natural gas, or oil burner.
Applications
Thousands of incinerators are being used to dispose of
animal carcasses and
other pathological waste.
Specifications Summary
|
|
|
MODEL |
A400-1G
Single burner gas-fired incinerator |
| A400-1O
Single burner oil-fired incinerator |
| WASTE CHAMBER |
Chamber capacity
(Type IV waste - animals) |
181 kg |
| Chamber volume |
.34 m³ |
Chamber size (outside)
(less burner and counter weights) |
Width |
91 cm |
| Height |
86 cm |
| Length |
122 cm |
| Door opening |
56 x 74 cm |
| Height to door |
77 cm |
| Height to top of stack |
3.3 m |
Suggested slab size
(L x W x Thickness) |
1.8 m x 2.4 m x 10 cm |
| STACK |
2'-14" dia. (36 cm), 14 gauge (1.90 mm)
aluminized steel, refractory lined |
| 5'-12" dia. (30.5 cm), 16 gauge (1.52 mm)
stainless steel |
| BURNERS |
LP or natural gas burner with electronic flame
safety and spark ignited intermittent pilot.
Oil burner with automatic ignition and flame safety shut-off. |
| Operation |
Manual timer |
|
ELECTRICAL SERVICE |
Standard - 115 volt, 60 HZ, 20 amp |
| Also available - 220 volt, 50 HZ, 10 amp |
| TOTAL WEIGHT (approx.) |
1,969 lbs |
896 kg |
| |
The DEFRA (U.K.) Approved Model A400 (A)
Main Features
The main changes from
the existing A400 model incinerator are as follows: -
-
A secondary chamber
fitted on top of the existing
incinerator.
-
15 to 20 minute warm up
time to 850 deg. C in secondary chamber as per the EU WID and ABPR
-
A lean burning dual
burner unit with warm up, incinerate, and cool down stages.
-
A temperature probe
with high visibility readout fitted near to the outlet.
These
changes have ensured that the unit meets the 2-second retention time at
temperatures in excess of 850 deg. C.
Benefits of The
New A400(A) Incinerator
Extremely clean burn unit
· Top
loading design so there is no chance of leaks / contamination from the burn
chamber.
· The
new afterburner and chamber can be retro fitted to existing, older models to
bring them up to standard.
· Only
requires a 10 amp electric supply to run the motors.
· Cost
effective fuel consumption.
· Oil,
propane or natural gas available.
Designed
specifically for disposal of poultry and animal carcasses. Each
burner is set on a timer and will shut down when at ‘0’
Reduces 181kg of carcasses to approximately 9kg of sterile
ash residue
New Mobile Incinerator Available
Inciner8 have teamed up with the very
well respected 'Ifor Williams Ltd' to have available a heavy duty but
lightweight trailer which is suitable for both the model A200 and Model
A400 units. Please
contact us for more details and specifications.
|
Click
