Home | CatalogueContact Us   
Spacer Image

     Inciner8 Model A200 Incinerator

DEFRA Approved Model now available Click HERE

Click HERE to Download a Brochure

A200 IncineratorEase of use

Auto ignition. No pilots to light. Set the timer and walk away.

Single burner reduces maintenance cost.

Fuel efficiency

Rapid incineration means low fuel consumption.

Thick refractory lining in main chamber retains heat, increasing efficiency.

Quality built to last

Heat resistant aluminized steel.

Stainless steel stack.

 

 

The benefits of incineration . . .

SANITARY -Waste can be destroyed as fast as it accumulates. Nothing is left to spread disease or to attract rodents and flies.

CONVENIENT - Fill the chamber and turn on the burner. No watching required since timer automatically shuts down burner. Alternative methods frequently require more time to manage and maintain.

THOROUGH - Leaves only sterile white ash and brittle bone fragments. Reduces 100kg. of animal carcasses or waste to approximately 5kg. of sterile residue.

A200 Incinerator Open

Applications

Thousands of incinerators are being used to dispose of animal carcasses and other pathological waste.

Features overview

  • Designed for economical performance.

  • 100kg capacity.

  • Low profile for easy loading and ash removal.

  • Refractory lined to retain heat for efficient operation.

  • Available with LP, Natural gas or fuel oil burner

Specifications

A200-1G

Single burner gas-fired incinerator

A200-1O

Single burner oil-fired incinerator

Waste Chamber

Chamber capacity (Type IV waste-animals)

100 kg

Chamber volume

.18 m3

Chamber size 
(outside)

Width

66 cm

Height

81 cm

Length

107 cm

Door dimensions

46 x 66 cm

Height to door

76 cm

Height to top of chamber

81 cm

Suggested slab size (l x w x thick)

1.8 m x 2.4 m x 10 cm

Stack

Dimensions

30 cm dia., 152 cm L

Material: Stainless steel

1.52 mm thick

Burners

  • LP or natural gas burner with spark ignition and flame safety shut-off

  • Oil burner with automatic ignition and flame safety shut-off. Auxiliary blower is standard with compete unit.

Operation

manual timer

 

General

Electrical service

Standard

115 volt, 60 HZ, 
20 amp

 

Also 
available

220 volt, 50 HZ, 
10 amp

Total weight (approx.)

 

454 kg

 

The DEFRA (U.K.) Approved Model A200 (A)

 

Main Features

The main changes from the existing A200 model incinerator are as follows: -

  • A secondary chamber fitted on top of the existing incinerator.

  • 15 to 20 minute warm up time to 850 deg. C in secondary chamber as per the EU WID and ABPR

  • A lean burning dual burner unit with warm up,  incinerate, and cool down stages.

  • A temperature probe with high visibility readout fitted near to the outlet.

 These changes have ensured that the unit meets the 2-second retention time at temperatures in excess of 850 deg. C.

Benefits of The New A200 (A) Incinerator

Extremely clean burn unit

·     Top loading design so there is no chance of leaks / contamination from the burn chamber.

·     The new afterburner and chamber can be retro fitted to existing, older models to bring them up  to standard.

·     Only requires a 10 amp electric supply to run the motors.

·     Cost effective fuel consumption.

·     Oil, propane or natural gas available.

·     

 

 

      Designed specifically for disposal of poultry and animal carcasses.

·     Each burner is set on a timer and will shut down when at ‘0’

Reduces 100kg of carcasses to approximately 9kg of sterile ash residue

 

New Mobile Incinerator Available

Portable / mobile incinerator

Inciner8 have teamed up with the very well respected 'Ifor Williams Ltd' to have available a heavy duty but lightweight trailer which is suitable for both the model A200 and Model A400 incinerators. Please contact us for more details and specifications.

mobile incinerator mobile incinerators

Copyright © 2004
Inciner8 Limited
All Rights Reserved.