The ever increasing costs faced to dispose of waste is escalating. Incineration is proved to be the most effective way of eradicating this problem.

Our range of units are fully CE certified, ensuring that we meet the highest standards in safety and construction.
Inciner8 pride ourselves on our high level of customer service and support. We have a worldwide dealership network and also provide qualified telephone support when needed.
Most of our incinerators are despatched 90% completed for extremely easy installation. The Model M60 is available completely preassembled at a small extra charge.

Ash Door as Standard

The Model A-60 is our smallest incinerator and was designed for many waste incineration uses.
The unit has a .13 cubic meter combustion chamber, combined with a ash box and a removal door.
The secondary chamber provides a post combustion afterburner to ensure that all gases are re-burnt.
There is lockable front loading door with safety features which ensures ease of use and the correct positioning of the waste in the chamber.
The whole unit is a 3mm anodised steel shell with a 6cm thick refractory lining which keeps the heat inside the chamber whilst allowing cool walls on the outside.
The internal design of the unit allows for a fire grate. The burner fires from below the grate to allow very quick combustion, whilst at the same time allowing ash to fall through the grill to be collected in the ash box.
This unit has an integral secondary burner and chamber to allow for expansion of gases and afterburn.

Heat Recovery Option

As part of Inciner8’s commitment to environmental factors, we have designed a bolt on heat recovery system for hot water.
Whilst the hot water system will not probably replace the existing system, it will certainly reduce your energy costs and compliment your hot water storage facility.
The heat recovery kit can be retro fitted or the unit can be ordered complete at the time of purchase.
 

Front Loading Door

Applications

Thousands of incinerators are being used to dispose of animal carcasses, general waste and other pathological waste.

     

Features Overview

• Cost Effective

• Low running and maintenance costs

• High pressure Fan Assisted Oil or Gas Burners

• Fully Automatic and simple to operate control panel

• Afterburner Preheat

• Variable time settings (can be set to meet individual requirements)

• Incineration Temperatures can be preset

• 3mm Steel Casing

• Fully insulated

• Dense Refractory Concrete Lining Rated to 1400 degrees C

• Grill and Solid Hearth to Allow Maximum Burnout

• Front Opening door For Easy Loading

• Wide Door For Ash Removal

• Stainless Steel Flue as standard

• After Burner Fitted as standard

• Comes Complete with 10 metres of Electrical Supply Cable

• 12 Month or 1000 hours Warranty.

• Optional Stainless Steel Casing

• Optional Automatic Temperature Recording

• CE Marking

• Heat Recovery System option
   

Technical Specifications	A60
Fuel	Oil or Gas
Cubic Capacity (Mtr)	0.12
Ave Capacity	50 Kgs
Fuel Consumption (Litres/ hr)	3
External Dimensions
Length (mm)	750
Width (mm)	750
Height incl. flue (mm)	2200
Door Aperture (mm)	400 x 300
Internal Dimensions
Length (mm)	650
Width (mm)	650
Height (mm)	800
Operation
Min. Operating Temperature	600 C
Max. Operating Temperature	1000 C
Residency Time in Afterburner Chamber	1 Sec
Temperature Monitoring	Optional