Medical / Waste Incinerators
The 250Mis designed to burn Type IV pathological waste and infectious and contaminated "red bag," surgical dressings, plastic test devices and other wastes. If you are paying a high fee to haul these waste materials to a disposal site, now is the time to consider the on-site Incineration alternative.

Benefits

Fast, complete, efficient waste disposal

Heavy duty refractory lined (rated 1550 deg C), cylindrical primary and secondary chamber

250 kg capacity per batch load

Integral 300 litre fuel tank

Primary chamber temperatures in excess of 1000 deg C and secondary chamber temperatures of above 900 deg C with a 2.0 second gas retention time.

Minimum installation and start up time

Factory assembled, no installation required. Connect electricity and the unit is ready to operate

Monitors, recorders and other accessory equipment available.

Easy and safe operation

Automatic control system provides preset burn times and shut off.

Temperature monitoring as standard

Safety fan run on timer

Low energy consumption levels

Programmable digital temperature controls maintain temperature, assuring complete combustion while conserving fuel.

Secondary burner with temperature activated modulating control provides fast preheat and sustains high temperature performance at low energy consumption levels.

Charging rate

Up to 250kgs per batch load of Type IV pathological waste or red bag waste rated at 2200 BTU's per kg. Burn rate of approximately 50kgs per hour

Technical Specifications	250M
Fuel	Oil or Gas
Cubic Capacity (Mtr)	.59
Ave Capacity	250 Kgs
Fuel Consumption (Litres / hr)	9
External Dimensions
Length (mm)	2130
Width (mm)	1050
Height incl. flue (mm)	3560
Door Aperture (mm)	640 x 490
Internal Dimensions
Length (mm)	1440
Width (mm)	720
Height (mm)	720
Operation
Min. Operating Temperature	950 C
Max. Operating Temperature	1320 C
Residency Time in Afterburner Chamber	2 Sec
Temperature Monitoring	YES